Combined-Machine Tap with round shank and square drive Works Standard 30° SP HSSE - M 3 x 0.5
Delivery time: approx. 1-3 working days
| Manufacturer: |  |
|---|---|
| EAN: | 4022835370260 |
| Product number: | VOE37026 |
| Article name | Combined-Machine Tap with round shank and square drive Works Standard 30° SP HSSE - M 3 x 0.5 |
|---|---|
| Product number: | VOE37026 |
| Manufacturer | VÖLKEL |
| Type | with round shank and square drive |
| Standard | Works Standard |
| Type of flute | 30° Spiral Flute |
| Material | HSSE |
| Type of thread | metric ISO-thread |
| Size | M 3 x 0.5 |
| Thread standard | DIN 13 |
| Tolerance | ISO2 (6H) |
| Overall length (L1) | 56 mm |
| Thread length (L2) | 11 mm |
| Shank diameter (D2) | 3 mm |
| Length (S1) | 16 mm |
| Square | 2.4 mm |
| Application | for through holes |
Combined-Machine Tap M 3x0.5 HSSE
The Combined Tap enables the user to produce the tapping drill hole and the through thread in one operation without any tool changing.
The tool incorporates a twist drill before the thread-tapping part. This tool can produce through threads up to a maximum threaded depth of 2 x D.
The Combined Tap is suitable for universal use in materials of medium mechanical strength: non-alloyed and alloyed steel sorts up to 600 N/mm², malleable cast iron, nodulized graphite cast iron, copper, brass, aluminium, aluminium-magnesium and zinc alloys, red bronze, electron metal, pressure-cast zinc. This tool should be used on machines possessing an RP switchover facility for drilling and tapping. The feed rate must be adapted to the particular operation required - drilling or tapping. Tapping chucks with pressure compensation may not be used.
Information on product safety
Manufacturer:
VÖLKEL GmbH Morsbachtalstr. 20, 42855 Remscheid, Germany +49 2191 490112 [email protected]