M (metric) HSSE
Hand taps, metric ISO-thread DIN 13
The VÖLKEL HSSE hand taps offer a very high cutting edge durability. The taps are particularly suitable for general use and for tapping difficult-to-machine materials and steels up to 1200 N/mm² tensile strength.
Taps for right-hand threads, metric
- Hand taps according to DIN standard
- Taps for through holes and blind holes
- Thread sizes from M 3 to M 30
HSSE Steam tempered hand taps
⚠️ The steam tempered taps are particularly suitable for high-alloy steels, heat-resistant steels, stainless steels, alloy tool steels and wear-resistant steels with a tensile strength of up to 1400 N/mm². Special feature: The roughers are piloted to ensure precise alignment at the start of thread cutting.
.png)
15
Variants
Hand Taps DIN 352 HSSG in sets of 3 pieces + Adjustable Tap Wrench and Tap Holder with Ratchet Contents 1x VÖLKEL Hand Tap set of 3 pcs. DIN 352 HSSE - M 3 x 0.5 (VOE57326) 1x VÖLKEL Hand Tap set of 3 pcs. DIN 352 HSSE - M 4 x 0.7 (VOE57330) 1x VÖLKEL Hand Tap set of 3 pcs. DIN 352 HSSE - M 5 x 0.8 (VOE57334) 1x VÖLKEL Hand Tap set of 3 pcs. DIN 352 HSSE - M 6 x 1.0 (VOE57338) 1x VÖLKEL Hand Tap set of 3 pcs. DIN 352 HSSE - M 8 x 1.25 (VOE57342) 1x VÖLKEL Hand Tap set of 3 pcs. DIN 352 HSSE - M 10 x 1.5 (VOE57346) 1x VÖLKEL Hand Tap set of 3 pcs. DIN 352 HSSE - M 12 x 1.75 (VOE57350) 1x VÖLKEL Adjustable tap wrench DIN 1814 Zinc die cast No. 1.1/2 (VOE13015) 1x VÖLKEL Tap Holder with Ratchet for right- and left-hand-turn No. 1 (VOE10001)
€170.17*
7
Variants
M 3 – M 12
From €29.63*
P.K.51 Hand taps HSSE VAP (set of 22 pcs.) M 3 - M 12
€279.65*
15
Variants
7
Variants
7
Variants
7
Variants
