V-COIL Automotive
For the vehicle sector, V-COIL Automotive offers threrad repair kits, wire thread inserts, tools and accessories for the following applications:
- Spark plug threads
- Oil drain screw threads
- Oxygen sensor threads
For a simple handling, a fast installation and especially for cost and time saving. V-COIL Automotive is a proper solution which should not be missing in any car-repair workshop.
.png)
9
Variants
M 14 x 1.25
From €52.36*
For general use of non-abrasive material up to 900N/mm², unalloyed and low alloyed steel. For thread cutting by machine.
€37.60*
4
Variants
From €3.81*
incl. VAT
V-COIL Thread Insert Type SP for M 14 x 1.25 spark plug threads 9.5 mm – 17.5 mm 9.5 mm – 17.5 mm
From €3.81*
5
Variants
M 13x1.5 - M 24x1.5
From €52.36*
5
Variants
M 13x1.5 – M 24x1.5
From €22.25*
5
Variants
Application:
for oil drain threads
for the simple and fast repair of defective oil drain screw threads
Type A with external hexagon for open-end wrench or ratchet
Advantages:
kits and fitting single tools are available, too
From €3.09*
3
Variants
M 18 x 1.5
From €94.01*
€10.47*
incl. VAT
V-COIL Thread Insert Type LS (INCONEL X750) for oxygen sensor thread M 18 x 1.5 - 9.0 mm Made of INCONEL X750. For repairing mounting threads for oxygen sensors in motor vehicles.
€10.47*
Made of stainless steel (VA). For repairing mounting threads for oxygen sensors in motor vehicles.
€11.07*
€85.68*
incl. VAT
V-COIL Thread Repair Workshop Kit (48 pieces) M 13x1.5 / M 15x1.5 / M 17x1.5 for oil drain screw threads V-COIL Oil Sump Repair Workshop Kit For oil drain screw threads HexTap OS, Oil Drain Screws and Retainer Rings
€85.68*
€85.68*
incl. VAT
V-COIL Thread Repair Workshop Kit (52 pieces) M 20x1.5 / M 24x1.5 for oil drain screw threads V-COIL Oil Sump Repair Workshop Kit For oil drain screw threads HexTap OS, Oil Drain Screws and Retainer Rings
€85.68*
€145.18*
incl. VAT
V-COIL Thread Repair Workshop Kit (41 pieces) M 13x1.5 / M 15x1.5 / M 17x1.5 / M 20x1.5 / 24x1.5 for oil drain screw threads V-COIL Oil Sump Repair Workshop Kit For oil drain screw threads HexTap OS, Oil Drain Screws and Retainer Rings
€145.18*
8
Variants
M 6 - M 18
From €42.48*
3
Variants
8.40 mm – 16.40 mm
From €40.46*
3
Variants
From €7.14*
incl. VAT
V-COIL Thread Insert (refill pack) "free running" type "S" 12.4 mm - 8.40 mm – 16.40 mm 8.40 mm – 16.40 mm
From €7.14*
For cutting a holding thread for thread inserts to receive oxygen sensors. Due to the grinded reamers cone at the tip no pre-drilling of the old thread is necessary.
€31.89*
€22.97*
incl. VAT
V-COIL HexTap Type LSN for installation of solid thread inserts for oxygen sensor thread M18x1,5 HSS-G - M 18 x 1.5 For cleaning and repairing damaged oxygen sensor threads. For threads which are not damaged too badly, a thread repair is possible without using a thread insert. Can also be used as an inserting tool for wire thread inserts for oxygen sensor threads.
€22.97*
6
Variants
Application: for sealing of oil drain screw threads Using for the repair of defective threads of the oil drain screw Advantages: kits and fitting single tools are available, too available in copper (CU) and aluminium (ALU)
From €8.93*
