UNC (Unified coarse)
Hand taps, Unified Coarse thread ANSI B 1.1
Hand taps for UNC threads suitable for non abrasive materials up to 900 N/mm² and for threading in through or blind holes. Available in cylindrical and conical (non-serial) form.
Hand taps for american UNC right hand threads
- Hand taps (UNC) acc. to DIN, ISO and JIS-B standard
- Variations from UNC No. 1 to UNC 3"
.png)
31
Variants
UNC No. 1 – UNC 3”
From €16.07*
Hand Taps DIN 352 HSSG in sets of 3 pieces + Adjustable Tap Wrench Contents 1x VÖLKEL Hand Tap set of 3 pcs. DIN 352 HSS-G - UNC No. 5 x 40 (VOE23305) 1x VÖLKEL Hand Tap set of 3 pcs. DIN 352 HSS-G - UNC No. 8 x 32 (VOE23308) 1x VÖLKEL Hand Tap set of 3 pcs. DIN 352 HSS-G - UNC No. 10 x 24 (VOE23310) 1x VÖLKEL Hand Tap set of 3 pcs. DIN 352 HSS-G - UNC 1/4 x 20 (VOE23314) 1x VÖLKEL Hand Tap set of 3 pcs. DIN 352 HSS-G - UNC 5/16 x 18 (VOE23316) 1x VÖLKEL Hand Tap set of 3 pcs. DIN 352 HSS-G - UNC 3/8 x 16 (VOE23318) 1x VÖLKEL Hand Tap set of 3 pcs. DIN 352 HSS-G - UNC 1/2 x 13 (VOE23322) 1x VÖLKEL Adjustable tap wrench DIN 1814 Zinc die cast No. 1.1/2 (VOE13015)
€138.04*
Hand Taps DIN 352 HSSG in sets of 2 pieces
€86.87*
31
Variants
UNC No. 1 – UNC 3”
From €5.36*
31
Variants
UNC No. 1 – UNC 3”
From €5.36*
31
Variants
UNC No. 1 – UNC 3”
From €5.36*
10
Variants
UNC 3/16 – UNC 1”
From €17.85*
10
Variants
UNC 3/16 – UNC 1”
From €5.95*
10
Variants
UNC 3/16 – UNC 1”
From €5.95*
10
Variants
UNC 3/16 – UNC 1”
From €5.95*
24
Variants
UNC No. 4 – UNC 2”
From €16.07*
24
Variants
UNC No. 4 – UNC 2”
From €5.36*
24
Variants
UNC No. 4 – UNC 2”
From €5.36*
24
Variants
UNC No. 4 – UNC 2”
From €5.36*