P.V.15 Hand taps, non-serial and round dies (set of 31 pcs.) M 3 – M 12

Content:

Hand tap DIN 352, non-serial
Set per 3 pcs. Round Dies 25 x 9 mm ø

Application:

for general use:

• non abrasive material up to 900 N/mm²
• unalloyed and low alloyed steel
• for through and blind holes
• for thread cutting by hand
• small and handy problemsolver for standard application
• the most popular dimensions in one case

Contents:

• 1x Tap holder with Ratchet for right- and left-hand-turn, Size 1 VÖLKEL 10001
• 1x Adjustable Tap Wrenches DIN 1814 Size 1.1/2 VÖLKEL 13015
• 1x Die Stocks, Zinc die cast (mm) DIN 225 (DIN EN 22568) Size 25 x 9 VÖLKEL 15004
• 1x Hand tap set, non-serial, DIN 352, HSS-G, M 3 x 0.5 VÖLKEL 27626
• 1x Hand tap set, non-serial, DIN 352, HSS-G, M 4 x 0.7 VÖLKEL 27630
• 1x Hand tap set, non-serial, DIN 352, HSS-G, M 5 x 0.8 VÖLKEL 27634
• 1x Hand tap set, non-serial, DIN 352, HSS-G, M 6 x 1.0 VÖLKEL 27638
• 1x Hand tap set, non-serial, DIN 352, HSS-G, M 8 x 1.25 VÖLKEL 27642
• 1x Hand tap set, non-serial, DIN 352, HSS-G, M 10 x 1.5 VÖLKEL 27646
• 1x Hand tap set, non-serial, DIN 352, HSS-G, M 12 x 1.75 VÖLKEL 27650
• 1x Round Dies, HSS-G, M 3 x 0.5 VÖLKEL 27826
• 1x Round Dies, HSS-G, M 4 x 0.7 VÖLKEL 27830
• 1x Round Dies, HSS-G, M 5 x 0.8 VÖLKEL 27834
• 1x Round Dies, HSS-G, M 6 x 1.0 VÖLKEL 27838
• 1x Round Dies, HSS-G, M 8 x 1.25 VÖLKEL 27842
• 1x Round Dies, HSS-G, M 10 x 1.5 VÖLKEL 27846
• 1x Round Dies, HSS-G, M 12 x 1.75 VÖLKEL 27850